These drums machines are great for bending, so many options for control surfaces and bend connections. This time i used a 28 way patch bay to control the bends, and 6 patchable switches to make connections on the fly. Along the bottom of the patch bay is a row of 6 sockets for making multiple connections between bends.
I installed a few LED’s in this for fun, they only indicate if a switch is on or off, not react to the drum patterns.
September 17th, 2007 - 9:18 am
Do you have any pictures of it?
September 18th, 2007 - 11:24 am
hi disco, yeah, if you click the MORE>>>> button above, or click on the HR-16 page on the right hand side, that will take you to a page documenting it all.
cheers,
bod.
January 8th, 2008 - 11:18 pm
F’in great!!
By any chance do you have the schematics? I bought mine off a guy who f*cked with the volume slider. And now there’s no sound!!
I could send you some money for it.
Thanks,
Roger
January 20th, 2008 - 12:47 pm
hi roger, i dont have a schematic unfortunately. if you check the hr-16 project page, thers a guy called Z who had a similar problem, but i’m not sure if he resolved it.
i do have the service manual i could send you, but you can also download it from the Burnkit2600 site. thom and justin rule this machine! they may have some ideas.
good luck!
bod